High Strength Plastic Gears, Small Plastic Wheel Gears, Gear Mould

Description

All the content of this page is from the Internet and is only provided as a reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks mentioned in the content. Our replacement parts can be perfectly adapted to the original spare parts. If you need to buy original spare parts, please contact the original factory to make a purchase. If you want to buy original spare parts, please contact the original supplier for purchase.

High Strength Plastic Gears, Small Plastic Wheel Gears, Gear Mould

The high strength plastic gears, small plastic wheel gears, and gear mould discussed here are made from nylon PA6 sheets and rods. These products are manufactured by Guangzhou Engineering Plastics Industries (Group) Company using 100% virgin raw material. The nylon PA6 sheets and rods exhibit excellent performance characteristics such as toughness even at low temperatures, high hardness on the surface, mechanical shock resistance, and abrasion resistance. Additionally, they possess good insulation and chemical properties, making them widely used in various mechanical structures and spare parts.

Advantages:

  1. Good tensile strength
  2. High impact and notching impact strength
  3. High heat deflection temperature
  4. High strength and stiffness
  5. Good glide and limp home characters
  6. Good chemical stability against organic solvents and fuels
  7. Resistant to thermal aging (applicable temperature between -50°C and 110°C)
  8. Size alternation by humidity absorption must be considered

Application:

  • Nylon PA6 products from Guangzhou Engineering Plastics Industries (Group) Company are widely used as wear parts of mechanical equipment or as quick-wear parts instead of copper and alloy.
  • They can be used for shaft sleeves, bearing bushes, linings, lining plates, gears, worm gears, roller copper guide rails, piston rings, seal rings, slide blocks, spheric bowls, impellers, blades, cams, nuts, valve plates, pipes, stuffing boxes, racks, belt pulleys, pump rotors, and more.

Main Properties of Nylon

Property Item No. Unit MC Nylon (Natural) Oil Nylon+Carbon (Black) Oil Nylon (Green) MC901 (Blue) MC Nylon+MSO2 (Light black)
Mechanical Properties 1 Density g/cm3 1.15 1.15 1.135 1.15 1.16
2 Water absorption (23ºC in air) % 1.8-2.0 1.8-2.0 2 2.3 2.4
3 Tensile strength MPa 89 75.3 70 81 78
4 Tensile strain at break % 29 22.7 25 35 25
5 Compressive stress(at 2%nominal strain) MPa 51 51 43 47 49
6 Charpy impact strength (unnotched) KJ/m2 No break No break ≥50 No BK No break
7 Charpy impact strength (notched) KJ/m2 ≥5.7 ≥6.4 4 3.5 3.5
8 Tensile modulus of elasticity MPa 3190 3130 3000 3200 3300
9 Ball indentation hardness N/mm2 164 150 145 160